Voor 17:30 uur besteld, dezelfde werkdag verzonden
Twee jaar garantie op Ubiquiti & MikroTik producten
Gratis verzending op orders boven de € 250 in NL en BE

TruAudio LEA Connect Series 352, 2-Channel, 350w, 70v/100v Amplifier, 1U.

SKU: LEA-CONNECT352 EAN: 0850011348406
LEA Connect Series 352, 2-Channel, 350w, 70v/100v Amplifier, 1U.
LEA Connect Series 352, 2-Channel, 350w, 70v/100v Amplifier, 1U.
Omschrijving +

Proprietary Smart Power Bridge - Smart Power Bridge allows users to bridge a channel to achieve double the power of that channel without sacrificing an amplifier channel.

Experts at a Distance - The LEA Cloud platform allows system design experts to support customers from a distance, without the need to visit job sites. Designers can tune and adjust audio systems remotely.

Technical Support via "Telepresence" - LEA Cloud technology allows support functions that used to require on-site visits to be carried out without someone physically being present at the venue.


Efficiency and Recurring Revenue Opportunities
- Add real-time monitoring into service contracts
- Amplifiers can tell when preventative maintenance is required before a failure actually occurs.
- Ability to do remote troubleshooting without having to put someone on a truck.
- Know what components go on the truck before being onsite reducing service call time and visits.
- Web Browser-based UI - works on any device with no software to download
- Direct LoZ and HiZ (70V or 100V) selectable per channel
- 3 Ways to Connect:
1.) Built in WiFi Access Point
2.) Connects to existing WiFi network
3.) Local Area Network Ethernet connection
- Highly Efficient Class D Output Stage for low AC Current draw
- 96kHz Analog Devices DSP with Input Routing, multiple 48dB/Oct crossover filters, 8 Parametric EQ filters, user configurable speaker limiters, and real time load monitoring
- Universal Switch Mode Power Supply with PFC. Operation from 100VAC - 240VAC +/-15%
- Analog fully routable inputs
- External I/O Port for Remote On/Off and fault monitoring

Specifications

Output Power (20Hz to 20kHz) 2 x 350 WRMS @ 4Ohm, 8Ohm, 70V, 100V (175W at 2Ohm)
Inputs Balanced analog Inputs with user selectable 26 dB and 34 dB input sensitivity
THD+N 0.1% (20Hz to 20kHz)
Frequency Response +/- 0.5 dB @ 4Ohm, 8Ohm, 70V, 100V, -2.5dB @ 20kHz at 2Ohm
Signal to Noise Level 105dB (20Hz to 20kHz referenced to 8Ohm)
Crosstalk 70dB (20Hz to 20kHz)
I/O Latency 1 ms DSP latency under any condition
Load Impedance LowZ down to 2 ohms, 70V direct, and 100V Direct per channel
Amplifier Output Classification Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
DC Offset +/- 3mV
DSP Architecture Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
Input Matrix Routable matrix; any input to any output with primary and secondary input priority
Crossovers Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth)
Parametric EQ 8 Band Parametric EQ per channel
Output Delay 100ms per channel
Output Protection DC, VHF, and AC Mains Protection, Overtemp and Current Limiter, fan fault detection
User Adjustable Limiting Peak Voltage and RMS Voltage
Load Monitoring Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources
Network Connectivity WiFi or 100MB Ethernet with PoE or Built in WiFi Access Point (IEEE 802.11b/g/n WPA, WAP2, WEP) Operating Frequency: 2412 - 2472MHz ; Channel Spacing:5Mhz ; Modulation: DSSS, OFDM
User Interface Web Browser User Interface or 3rd Party API control (Q-Sys coming soon)
Supported Operating Systems MAC, iOS, PC, Android
Event Reporting User Downloadable and Viewable Event and Fault log - POE allows for enhanced error monitoring
External I/O External I/O In: Toggles Remote On/Off, External I/O Out: Indicates Amplifier Health
Cloud IoT Cloud-based IoT functionality
AC Mains 100VAC - 240VAC +/- 15% 50Hz or 60Hz
Temperature Storage: -20C to 90C - Operating: 0C to 60 C
Power Supply Universal Switch Mode Power Supply with Power Factor Correction (No PFC in 84, 164, 88, & 168)
Safety Approvals UL, CSA,CE, ETL, FCC, CCC, KETI, NOM , ROHS, PSE
Dimensions (L x W x H) 14.25inch x 19inch x 1U (362mm x 482mm x 1U)
Cooling Front to Rear Variable Fan Speed Cooling, Fan Noise at idel is 50dB @ 1m, Fan Noise at 50% is 57dB @1m, Fan Noise at full speed is 63dB @ 1m
Connectors Analog Input: 3 pin Amphenol Anytek, Output: 2 pin Amphenol Anytek, External IO: 3 pin Amphenol Anytek, Power in: IEC, Ethernet RJ45 In for Control ***Note: 84, 164, 8, & 168 do not have potentiometers on the rear panel

€ 1.649,00 excl. BTW

{{ defaultPrice }} {{ price }} excl. BTW p/stuk
Totaal {{ totalPrice }} excl. BTW
2 op voorraad, vandaag verzonden