Voor vragen bel: 0187 82 02 04

product-foto
product-detail
product-detail
product-detail
product-detail
Prijs:
€ 803,00
excl. BTW


Wordt reseller voor inkoopprijzen.
Niet op voorraad
  • Omschrijving
  • Eigenschappen
  • Downloads
The UniFi AC In-Wall Pro AP transforms an Ethernet wall connection into a simultaneous, dual-band 802.11AC Wi-Fi Access Point with 3x3 MIMO technology and 50% higher radio rates than the UAP-AC-IW. The UniFi AC In-Wall Pro features two Gigabit Ethernet ports, one of which delivers PoE to power and connect an 802.3af device to the network. It is available in single- and five-packs.

  • Environment: Indoor
  • Simultaneous Dual-Band
  • 2.4 GHz Radio Rate: 450 Mbps
  • 2.4 GHz MIMO: 3x3
  • 5 GHz Radio Rate: 1300 Mbps
  • 5 GHz MIMO: 3x3
  • Secondary Ethernet Port (2 Additional Ports)
  • PoE Mode: 802.3at PoE+
  • Wall Mount
  • Wireless Uplink
  • DFS Certification

Please note: The UAP-AC-IW requires a UniFi Switch with PoE for power. Passive PoE adapters are not recommended.

Specifications UniFI AC In Wall Pro

Dimensions: 139.7 x 86.7 x 25.75 mm (5.5 x 3.41 x 1.01")
Weight: 210 g (7.41 oz)
Networking Interface: (3) 10/100/1000 Ethernet Ports
Buttons: Reset
Power Method: 802.3at PoE+ Supported
Power Supply: UniFi PoE Switch (Not Included)
Power Save: Supported
PoE Out: 48V Pass-Through (Pins 1, 2+; 3, 6-)
Maximum Power Consumption: 10W
- with PoE Passthrough: 22W
Maximum TX Power:
- 2.4 GHz: 22 dBm
- 5 GHz: 22 dBm
Antennas: (1) Dual-Band Antenna, Single-Polarity
- 2.4 GHz: 5 dBi
- 5 GHz: 6.5 dBi
Wi-Fi Standards: 802.11 a/b/g/n/r/k/v/ac
Wireless Security: WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES)
BSSID: Up to 8 per Radio
Mounting: 1-Gang Electrical Wall Box (Not Included)
Operating Temperature: -10 to 50 C (14 to 122 F)
Operating Humidity: 5 to 95% Noncondensing
Certifications: CE, FCC, IC

Package Contents

Cover Plate (5), UniFI AC In Wall PRO (5), Back Plate (5), Wall-Mount Screws (5x4), Security Torx Screws (5x2), Philips Screws (5x2), Quick Start Guide.